ICEQC-PRD-4110 — Education Quality Applicability Module for Learning Devices cover

Document officiel contrôlé de l’ICEQC

ICEQC-PRD-4110 — Module d’applicabilité de la qualité de l’éducation aux dispositifs d’apprentissage

Ajoute des exigences de qualité de l’éducation applicables aux dispositifs d’apprentissage, notamment l’usage éducatif prévu, l’accès aux contenus, les instructions, la protection des apprenants et l’assistance pendant le cycle de vie.

Émis parConseil international pour la certification de la qualité de l’éducation

Document
ICEQC-PRD-4110:2026
Version
2026
Langue
EN
Texte du document
Consulter le document
ICEQC-PRD-4110 — Module d’applicabilité de la qualité de l’éducation aux dispositifs d’apprentissage
ICEQC-PRD-4110 — Education Quality Applicability Module for Learning Devices cover

Enregistrement de document contrôlé

Document
ICEQC-PRD-4110:2026
Édition
2026
Version
2026
Statut.
Publié
Langue officielle
EN
1

Name

1.1 Le présent document est l’ICEQC-PRD-4110, Module d’applicabilité de la qualité de l’éducation aux dispositifs d’apprentissage.

2

Objectif

2.1 This document establishes object-specific education quality requirements within a controlled ICEQC certification scope.

3

Limite de certification

3.1 Certification is voluntary, applies only to the stated scope and does not confer governmental authority, a licence, institutional recognition, academic equivalency, a ranking or approval of education content.

4

Conformity determination

4.1 Each applicable requirement shall be determined only as C or NC. NA requires confirmed objective non-applicability. Certification is prohibited while any applicable requirement is NC or any nonconformity remains open.

5

Remote assessment

5.1 Assessment is conducted remotely through controlled documents, data, interviews, demonstrations, independent sampling and suitable specialist evidence. ICEQC does not conduct routine on-site assessment.

6

Device model and configuration scope

6.1 The provider shall control each device model, hardware revision, operating build, included accessory and region-specific configuration within scope. 6.2 Application — Applies throughout every scope component using this standard. 6.3 Non-applicability — NA is not available where the stated condition exists. 6.4 Determination — Conformity exists only where current, attributable and verified evidence establishes this requirement across the complete applicable scope.

7

Initial setup and account activation

7.1 Setup and activation shall provide intelligible role, account, data, connectivity, recovery and supervision choices. 7.2 Application — Applies throughout every scope component using this standard. 7.3 Non-applicability — NA is not available where the stated condition exists. 7.4 Determination — Conformity exists only where current, attributable and verified evidence establishes this requirement across the complete applicable scope.

8

Display, audio and ergonomic operation

8.1 Display, audio, input and physical use conditions shall be suitable for declared learner groups and intended duration. 8.2 Application — Applies throughout every scope component using this standard. 8.3 Non-applicability — NA is not available where the stated condition exists. 8.4 Determination — Conformity exists only where current, attributable and verified evidence establishes this requirement across the complete applicable scope.

9

Power, battery and thermal control

9.1 Charging, battery, power and thermal conditions shall be specified, protected, tested and communicated. 9.2 Application — Applies throughout every scope component using this standard. 9.3 Non-applicability — NA is not available where the stated condition exists. 9.4 Determination — Conformity exists only where current, attributable and verified evidence establishes this requirement across the complete applicable scope.

10

Durability and foreseeable learner use

10.1 The device and critical accessories shall withstand defined transport, handling and learner-use conditions without unacceptable loss of function or protection. 10.2 Application — Applies throughout every scope component using this standard. 10.3 Non-applicability — NA is not available where the stated condition exists. 10.4 Determination — Conformity exists only where current, attributable and verified evidence establishes this requirement across the complete applicable scope.

11

Child safety and supervisory control

11.1 Devices intended for children shall include age-suitable setup, account, communication, purchase, content-access and supervisory controls. 11.2 Application — Applies throughout every scope component using this standard. 11.3 Non-applicability — NA is not available where the stated condition exists. 11.4 Determination — Conformity exists only where current, attributable and verified evidence establishes this requirement across the complete applicable scope.

12

Connectivity and network behaviour

12.1 Wireless, wired and peripheral connections shall be controlled for compatibility, security, data use and failure behaviour. 12.2 Application — Applies throughout every scope component using this standard. 12.3 Non-applicability — NA is not available where the stated condition exists. 12.4 Determination — Conformity exists only where current, attributable and verified evidence establishes this requirement across the complete applicable scope.

13

Operating environment and application control

13.1 Operating builds, approved applications, installation rights, privileged functions and restore conditions shall be controlled. 13.2 Application — Applies throughout every scope component using this standard. 13.3 Non-applicability — NA is not available where the stated condition exists. 13.4 Determination — Conformity exists only where current, attributable and verified evidence establishes this requirement across the complete applicable scope.

14

Identity, access and recovery

14.1 Learner, guardian, educator, administrator and service access shall be separated and recoverable without uncontrolled disclosure. 14.2 Application — Applies throughout every scope component using this standard. 14.3 Non-applicability — NA is not available where the stated condition exists. 14.4 Determination — Conformity exists only where current, attributable and verified evidence establishes this requirement across the complete applicable scope.

15

Privacy and local data

15.1 Sensors, identifiers, local records, diagnostics and transfers shall be purpose-limited, protected and subject to controlled deletion. 15.2 Application — Applies throughout every scope component using this standard. 15.3 Non-applicability — NA is not available where the stated condition exists. 15.4 Determination — Conformity exists only where current, attributable and verified evidence establishes this requirement across the complete applicable scope.

16

Security and update support

16.1 Security vulnerabilities and updates shall be monitored, prioritized, authenticated, tested and supported for a declared period. 16.2 Application — Applies throughout every scope component using this standard. 16.3 Non-applicability — NA is not available where the stated condition exists. 16.4 Determination — Conformity exists only where current, attributable and verified evidence establishes this requirement across the complete applicable scope.

17

Offline learning and synchronization

17.1 Offline learning records and later synchronization shall control version, conflict, duplication and loss. 17.2 Application — Applies throughout every scope component using this standard. 17.3 Non-applicability — NA is not available where the stated condition exists. 17.4 Determination — Conformity exists only where current, attributable and verified evidence establishes this requirement across the complete applicable scope.

18

Repair, replacement and record continuity

18.1 Repair, replacement and reset arrangements shall protect data and preserve or restore authorized learning records. 18.2 Application — Applies throughout every scope component using this standard. 18.3 Non-applicability — NA is not available where the stated condition exists. 18.4 Determination — Conformity exists only where current, attributable and verified evidence establishes this requirement across the complete applicable scope.

19

Lifecycle, reuse and disposal

19.1 Support period, ownership transfer, secure erasure, reuse, recycling and disposal arrangements shall be defined. 19.2 Application — Applies throughout every scope component using this standard. 19.3 Non-applicability — NA is not available where the stated condition exists. 19.4 Determination — Conformity exists only where current, attributable and verified evidence establishes this requirement across the complete applicable scope.